What seawall, dock and boat lift work costs around Daytona Beach
Waterfront work is priced by the foot for seawalls and by the square foot or the job for docks. The table below gathers rough 2026 national figures from Angi's cost guides in one place. Your quote will depend on length, access, the water and the permits, so treat these as a starting point, not a price.
Call (386) 333-6570Rather not call? Send the detailsCalls are answered weekdays, 9 to 6. After hours, leave your name, address and what's going on, and you'll get a call back first thing the next business day.
What does each job cost?
| Job | Rough cost | Notes |
|---|---|---|
| Seawall repair | $100–$250 per foot | About $10,000–$25,000 for 100 feet |
| New cap and tiebacks | $125–$230 per foot | Usually done together |
| New concrete seawall | $200–$800 per foot | Average project about $25,000 |
| New vinyl seawall | $200–$600 per foot | No steel in the panels |
| Riprap | $70–$400 per foot | Rock at the foot of a wall or a bank |
| New dock | $4,074–$26,021 | Average about $15,048 |
| Dock repair | $896–$5,881 | Average about $3,355 |
| Dock piling | $200–$1,600 each | Repair or replace |
| Boat lift | $2,000–$20,000 | Manual low, electric high |
These are national numbers. Coastal Florida work in salt water, with permits and manatee rules, can land toward the upper half of each range.
What moves the price of a seawall?
- Length: The biggest factor. Seawalls are priced per linear foot.
- Access: A crew that can work from the yard costs less than one working from a barge.
- How bad it is: Sealing joints is the cheap end; leaning walls and cracked panels the expensive end.
- Material: Concrete, vinyl and rock price differently and last differently.
- Permits and engineering: Angi puts permits at $150 to $2,500; surveys and engineering add more on new walls.
Angi's rule of thumb applies to both seawalls and docks: when a repair approaches half the price of new, replacing is often the better buy.
What moves the price of a dock or lift?
Size first: a piling dock runs roughly $20 to $40 a square foot, and your city caps how big it can be. Then materials: composite decking costs more up front than treated wood but needs less upkeep. Then add-ons: a lift, a roof, electrical. A new dock or slip also pays the county's one-time $412.45 manatee fee.
How do I compare quotes?
- Same scope: Make sure each quote covers the same length of wall or the same dock size, and the same repairs.
- Permits included?: Ask who pulls the permits and whether the fees are in the price.
- What's underneath: For seawalls, whether tiebacks and anchors are checked or replaced; for docks, whether pilings are.
- The license: Look the contractor up on the state's license search.
See seawall repair, dock repair and the permits guide for more on each job.
Common questions
Why are seawall prices given per foot?
Because length drives the work: every foot needs panels, cap, joint sealing and a share of the tiebacks and anchors.
Does homeowners insurance cover seawalls or docks?
It depends on the policy and the cause. Check your policy and ask your agent before work starts, especially after a storm.
How can I keep costs down?
Catch problems early. Sealing a joint and filling a small hollow costs far less than rebuilding a wall that has started to lean.
Sources: Angi, How much does it cost to repair a seawall? (Oct 2026) (source); Angi, How much does it cost to build a seawall? (Oct 2026) (source); Angi, Riprap installation cost (Oct 2026) (source); Angi, How much does it cost to build a dock? (Sept 2026) (source); Angi, Boat dock repair cost (Oct 2026) (source); Volusia County, Manatee protection plan: single-family residence (source); Florida DBPR, License search (source); City of Key Colony Beach, FL, Seawall owner's manual (2022) (source); UF/IFAS Extension Escambia County, What is it? Riprap (Feb 2026) (source).
Last reviewed November 1, 2026.
Rather not call? Send the details
A local seawall and dock pro will call you back.